FIRE FIGHTING HOSES & FITTINGS
Non-Percolating Flexible Fire Fighting Delivery Hose (Type 1)
Technical Specifications
- Material : Rubberised Fabric Reinforced Rubberlined (RRL) Woven-Jacketed
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Reinforcement : High Quality Synthetic Yarn
- Change in Diameter at Proof Pressure : (+/-) 10%
- Abrasion Resistance : At least 50 cycles before bursting in accordance with clause 6.12 of IS 636 : 2018
- Coil Diameter : >= 45 cm for 30 mtr length of dry hose without coupling
- Minimum Bursting Pressure : 38 kgf/cm sqr in accordance with IS:443 - 1975
- Workability : Can work at certified pressures as lab tested on calibrated machines
- Change in Length at Proof Pressure : (+/-) 6%
- Maximum Mass (Per Meter) : 300 gm for 38 mm, 375 gm for 50 mm, 450 gm for 63 mm & 500 gm for 70 mm
Non-Percolating Flexible Fire Fighting Delivery Hose (Type 2)
Technical Specifications
- Material : Rubberised Fabric Reinforced Rubberlined (RRL) Woven-Jacketed
- Reinforcement : High Quality Synthetic Yarn
- Minimum Bursting Pressure : 380 kgf/cm.sqr. in accordance with IS:443 - 1975
- Available Optional Colours : Orange / Yellow / Green / Blue / Black (Min. Qty. 3000 Mtrs.)
- Moisture Absorption : Amount of water absorbed shall not exceed of 0.20 kg/m²
- Maximum Mass (Per Meter) : 315 gm for 38 mm, 395 gm for 50 mm, 480 gm for 63 mm & 550 gm for 70 mm
- Change in Diameter at Proof Pressure : (+/-) 10%
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Coil Diameter : >= 50 cm for 30 mtr length of dry hose without coupling
- Moisture Absorption : Amount of water absorbed shall not exceed of 0.20 kg/m sqr.
- Workability : Can work at certified pressures as lab tested on calibrated machines
- Heat Resistance : Shall not burst at less than 8 seconds of the application of hot cube
- Abrasion Resistance : At least 75 cycles before bursting in accordance with clause 6.12 of IS 636 : 2018
- Change in Length at Proof Pressure : (+/-) 6%
Non-Percolating Flexible Fire Fighting Delivery Hose (Type 3)
Technical Specifications
- Material : Rubberised Fabric Reinforced Rubberlined (RRL) - Elastomeric Outer Covering
- Available Optional Colours : Orange / Yellow / Green / Blue / Black (Min. Qty. 3000 Mtrs.)
- Coil Diameter : >= 55 cm for 30 mtr length of dry hose without coupling
- Workability : Can work at certified pressures as lab tested on calibrated machines
- Moisture Absorption : Amount of water absorbed shall not exceed of 0.02 kg/m²
- Maximum Mass (Per Meter) : 380gm for 38 mm, 490gm for 50 mm, 620gm for 63 mm & 680gm for 70 mm
- Ozone Resistance : Lining & Cover of Hose neither develop cracking nor crazing
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Reinforcement : High Quality Synthetic Yarn
- Minimum Bursting Pressure : 38 kgf/cm.sqr. in accordance with IS:443 - 1975
- Heat Resistance : Shall not burst at less than 20 seconds of the application of hot cube
- Oil Resistance : No Swelling of Rubber & No Weathering and racking in rubber lining
- Abrasion Resistance : At least 100 cycles before bursting in accordance with clause 6.12 of IS 636 : 2018
- Proof Pressure (Min) : 23 kgf/cm sqr.
- Change in Diameter at Proof Pressure : (+/-) 10%
- Change in Length at Proof Pressure : (+/-) 6%
Controlled Percolating (CP) Hose for Fire Fighting
Technical Specifications
- Material : Fire Hose with Jacket 100% Synthetic Yarn Fabric Reinforced (Woven-Jacketed)
- Coil Diameter : >= 45 cm for 30 mtr length of dry hose without coupling
- Minimum Mass (Per Meter) : 250 gm for 38 mm, 300 gm for 50 mm, 350 gm for 63 mm & 400 gm for 70 mm
- Percolation : 0.4 to 4 ltr. for 38 mm, 0.6 to 5 ltr. for 50 mm, 0.8 to 5 ltr. for 63 mm, 1.2 to 6 ltr. for 70 mm
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Reinforcement : High Quality Synthetic Yarn
- Proof Pressure (Min) : 21.5 kgf/cm².
- Minimum Bursting Pressure : 35.7 kgf/cm sqr. in accordance with IS 443 : 1975
- Change in Diameter at Proof Pressure : (+/-) 10%
- Change in Length at Proof Pressure : (+/-) 6%
High Pressure Fire Fighting Hose (Type A)
Technical Specifications
- Material: Rubberised Fabric Reinforced Rubberlined (RRL) Woven-Jacketed
- Reinforcement: High Quality Synthetic Yarn
- Maximum Mass (Per Meter): 350gm for 38 mm, 450gm for 50 mm, 550gm for 63 mm & 650gm for 70 mm
- Change in Diameter at Proof Pressure: (+/-) 10%
- Minimum Bursting Pressure: 38 kgf/cm sq. in accordance with IS:443
- ID (Nominal Bore): 38 mm/ 50 mm/ 63 mm/ 70 mm
- Coil Diameter: >= 52 cm for 30 mtr length of dry hose without coupling
- Change in Length at Proof Pressure: (+/-) 6%
High Pressure Fire Fighting Hose (Type A) with Elastomeric Coating
Technical Specifications
- Material: Rubberised Fabric Reinforced Rubberlined (RRL). Woven-Jacketed with Elastromeric Coating
- Reinforcement: High Quality Synthetic Yarn
- Minimum Bursting Pressure : 380 kgf/cm.sqr. in accordance with IS:443 - 1975
- Maximum Mass (Per Meter): 350 gm for 38 mm, 450 gm for 50 mm, 550 gm for 63 mm & 650 gm for 70 mm
- Change in Diameter at Proof Pressure: (+/-) 10%
- ID (Nominal Bore): 38 mm / 50 mm / 63 mm / 70 mm
- Coil Diameter : >= 50 cm for 30 mtr length of dry hose without coupling
- Minimum Bursting Pressure: 38 kgf/cm². in accordance with IS:443
- Coil Diameter: >= 52 cm for 30 mtr length of dry hose without coupling
- Change in Length at Proof Pressure: (+/-) 6%
Fire Hose Delivery Couplings
Technical Specifications
- Material: Stainless Steel / Gun Metal / Aluminium
- Size: 63 mm
- Finish: Natural Polished
- Spring: SS (IS 6528) for Stainless Steel & Phosphorus Wire (IS 7608) for Gun Metal
- Rubber Washer: IS 937 (Type A)
- Hydrostatic Test: Tested at 21 kgf/cm² for Branch Coupling / 7 kgf/cm² for Branch Pipe
- Body Assembly: SS (IS 3444) for Stainless Steel & LTB2 (IS 318) for Gun Metal
Branch Pipe (Short) with Nozzle
Technical Specifications
- Material: Stainless Steel / Gun Metal / Aluminium
- Finish: Natural Polished
- Hydrostatic Test: Tested at 21 kgf/cm² for Branch Coupling / 7 kgf/cm² for Branch Pipe
- Size: 63 mm
- Rubber Washer: IS 937 (Type A)
- Body Assembly: SS (IS 3444) for Stainless Steel & LTB2 (IS 318) for Gun Metal
Branch Pipe (Universal) / Triple Purpose Nozzle
Technical Specifications
- Material: Stainless Steel / Gun Metal / Aluminium
- Size (Outlet Connection): 1/2", 5/8", 3/4", 1"
- Finish: Natural Polished
- Operating Pressure: 150 PSI Max.
- Size (Inlet Connection): 63 mm / 2 ½” Male Instantaneous
- Type: Jet - Spray - Shut off
Non-Percolating Flexible Fire Fighting Delivery Hose (Type 1)
Technical Specifications
- Material : Rubberised Fabric Reinforced Rubberlined (RRL) Woven-Jacketed
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Reinforcement : High Quality Synthetic Yarn
- Change in Diameter / Length at Proof Pressure : (+/-) 10% / (+/-) 6%
- Abrasion Resistance : At least 50 cycles before bursting in accordance with clause 6.12 of IS 636 : 2018
- Coil Diameter : >= 45 cm for 30 mtr length of dry hose without coupling
- Minimum Bursting Pressure : 38 kgf/cm sqr in accordance with IS:443 - 1975
- Workability : Can work at certified pressures as lab tested on calibrated machines
- Maximum Mass (Per Meter) : 300 gm for 38 mm, 375 gm for 50 mm, 450 gm for 63 mm & 500 gm for 70 mm
Non-Percolating Flexible Fire Fighting Delivery Hose (Type 2)
Technical Specifications
- Material : Rubberised Fabric Reinforced Rubberlined (RRL) Woven-Jacketed
- Reinforcement : High Quality Synthetic Yarn
- Minimum Bursting Pressure : 380 kgf/cm.sqr. in accordance with IS:443 - 1975
- Available Optional Colours : Orange / Yellow / Green / Blue / Black (Min. Qty. 3000 Mtrs.)
- Moisture Absorption : Amount of water absorbed shall not exceed of 0.20 kg/m²
- Maximum Mass (Per Meter) : 315 gm for 38 mm, 395 gm for 50 mm, 480 gm for 63 mm & 550 gm for 70 mm
- Change in Diameter at Proof Pressure : (+/-) 10%
- Moisture Absorption : Amount of water absorbed shall not exceed of 0.20 kg/m sqr.
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Workability : Can work at certified pressures as lab tested on calibrated machines
- Abrasion Resistance : At least 75 cycles before bursting in accordance with clause 6.12 of IS 636 : 2018
- Coil Diameter : >= 50 cm for 30 mtr length of dry hose without coupling
- Heat Resistance : Shall not burst at less than 8 seconds of the application of hot cube
- Change in Length at Proof Pressure : (+/-) 6%
Non-Percolating Flexible Fire Fighting Delivery Hose (Type 3)
Technical Specifications
- Material : Rubberised Fabric Reinforced Rubberlined (RRL) - Elastomeric Outer Covering
- Available Optional Colours : Orange / Yellow / Green / Blue / Black (Min. Qty. 3000 Mtrs.)
- Coil Diameter : >= 55 cm for 30 mtr length of dry hose without coupling
- Workability : Can work at certified pressures as lab tested on calibrated machines
- Moisture Absorption : Amount of water absorbed shall not exceed of 0.02 kg/m²
- Maximum Mass (Per Meter) : 380gm for 38 mm, 490gm for 50 mm, 620gm for 63 mm & 680gm for 70 mm
- Ozone Resistance : Lining & Cover of Hose neither develop cracking nor crazing
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Reinforcement : High Quality Synthetic Yarn
- Minimum Bursting Pressure : 38 kgf/cm.sqr. in accordance with IS:443 - 1975
- Heat Resistance : Shall not burst at less than 20 seconds of the application of hot cube
- Oil Resistance : No Swelling of Rubber & No Weathering and racking in rubber lining
- Abrasion Resistance : At least 100 cycles before bursting in accordance with clause 6.12 of IS 636 : 2018
- Proof Pressure (Min) : 23 kgf/cm sqr.
- Change in Diameter at Proof Pressure : (+/-) 10%
- Change in Length at Proof Pressure : (+/-) 6%
Controlled Percolating (CP) Hose for Fire Fighting
Technical Specifications
- Material : Fire Hose with Jacket 100% Synthetic Yarn Fabric Reinforced (Woven-Jacketed)
- Reinforcement : High Quality Synthetic Yarn
- Coil Diameter : >= 45 cm for 30 mtr length of dry hose without coupling
- Minimum Mass (Per Meter) : 250 gm for 38 mm, 300 gm for 50 mm, 350 gm for 63 mm & 400 gm for 70 mm
- Percolation : 0.4 to 4 ltr. for 38 mm, 0.6 to 5 ltr. for 50 mm, 0.8 to 5 ltr. for 63 mm, 1.2 to 6 ltr. for 70 mm
- ID (Nominal Bore) : 38 mm / 50 mm / 63 mm / 70 mm
- Proof Pressure (Min) : 21.5 kgf/cm².
- Heat Resistance : Shall not burst at less than 20 seconds of the application of hot cube
- Minimum Bursting Pressure : 35.7 kgf/cm sqr. in accordance with IS 443 : 1975
- Change in Diameter at Proof Pressure : (+/-) 10%
- Change in Length at Proof Pressure : (+/-) 6%
High Pressure Fire Fighting Hose (Type A)
Technical Specifications
- Material: Rubberised Fabric Reinforced Rubberlined (RRL) Woven-Jacketed
- Reinforcement: High Quality Synthetic Yarn
- Maximum Mass (Per Meter): 350gm for 38 mm, 450gm for 50 mm, 550gm for 63 mm & 650gm for 70 mm
- Change in Diameter at Proof Pressure: (+/-) 10%
- Minimum Bursting Pressure: 38 kgf/cm sq. in accordance with IS:443
- ID (Nominal Bore): 38 mm/ 50 mm/ 63 mm/ 70 mm
- Coil Diameter: >= 52 cm for 30 mtr length of dry hose without coupling
- Change in Length at Proof Pressure: (+/-) 6%
High Pressure Fire Fighting Hose (Type A) with Elastomeric Coating
Technical Specifications
- ID (Nominal Bore): 38 mm / 50 mm / 63 mm / 70 mm
- Reinforcement: High Quality Synthetic Yarn
- Coil Diameter : >= 50 cm for 30 mtr length of dry hose without coupling
- Change in Diameter at Proof Pressure: (+/-) 10%
- Change in Length at Proof Pressure: (+/-) 6%
- ID (Nominal Bore): 38 mm / 50 mm / 63 mm / 70 mm
- Maximum Mass (Per Meter): 350 gm for 38 mm, 450 gm for 50 mm, 550 gm for 63 mm & 650 gm for 70 mm
- Minimum Bursting Pressure : 380 kgf/cm.sqr. in accordance with IS:443 - 1975
Fire Hose Delivery Couplings
Technical Specifications
- Material: Stainless Steel / Gun Metal / Aluminium
- Size: 63 mm
- Finish: Natural Polished
- Spring: SS (IS 6528) for Stainless Steel & Phosphorus Wire (IS 7608) for Gun Metal
- Rubber Washer: IS 937 (Type A)
- Hydrostatic Test: Tested at 21 kgf/cm² for Branch Coupling / 7 kgf/cm² for Branch Pipe
- Body Assembly: SS (IS 3444) for Stainless Steel & LTB2 (IS 318) for Gun Metal
Branch Pipe (Short) with Nozzle
Technical Specifications
- Material: Stainless Steel / Gun Metal / Aluminium
- Finish: Natural Polished
- Hydrostatic Test: Tested at 21 kgf/cm² for Branch Coupling / 7 kgf/cm² for Branch Pipe
- Size: 63 mm
- Rubber Washer: IS 937 (Type A)
- Body Assembly: SS (IS 3444) for Stainless Steel & LTB2 (IS 318) for Gun Metal
Branch Pipe (Universal) / Triple Purpose Nozzle
Technical Specifications
- Material: Stainless Steel / Gun Metal / Aluminium
- Size (Outlet Connection): 1/2", 5/8", 3/4", 1"
- Finish: Natural Polished
- Operating Pressure: 150 PSI Max.
- Size (Inlet Connection): 63 mm / 2 ½” Male Instantaneous
- Type: Jet - Spray - Shut off
WHY MITRAS
We honor our promises because of:
- More than 32 years of trust and expertise.
- In-house BIS Approved & NABL Accredited Quality Control Lab.
- State of the art manufacturing facility.
- System & process driven company.
- Audited factories.
- Pan-India Presence.
- Thousands of satisfied customers.
OUR PRESENCE
BRAND PROMISERY
Do you face these challenges?
We promise
Reach us Directly
- Address:- 805, 8th Floor, Crown Heights, Hotel Crowne Plaza Complex, Sector 10, Rohini, Delhi- 110085
- Email:- sales@mitrastechno.com
- Contact:- 93107 93107
